Raptor

Code: 679 CL Plate Clamp
  • The Raptor CL plate clamp is suitable for the lifting, turning (180°) and vertical transfer of steel plates and constructions
  • It is fitted with a locking device
  • Fitted with a hinged hoisting eye moving in all directions so as to enable the user to place and lift the load from any direction
  • The lifting clamps are fitted with special hook-up facilities to enable easy fitment of the clamp in horizontal position
  • The new models have a greater jaw aperture enabling plates of varying thickness to be lifted with the same clamp
  • Conforms to CE safety standards
Model CL05 CL10 CL20 CL30
Rated Capacity (kg) 500 1000 2000 3000
Jaw Opening (mm) 0-15 0-20 0-25 0-30
Dimensions (mm) A 0-17 0-22 0-27 0-32
B 44 63 76 85
C 128 167 202 237
D 212 295 370 418
E 30 48 70 75
F 103 138 164 193
G 36 50 52 78
H 35 51 56 59
K 10 12 16 20
Net Weight (kg) 1.9 4.8 6.5 15
Enquire about this item
Code: 683 CM Adjustable Skate
  • Shifting skates can be used wherever heavy objects have to be moved. The load can be lifted using either the roller crowbar or a jack, allowing the skates to be easily positioned
  • The large diameter sealed nylon rollers ensure ease of movement and spread the load, protecting high quality floors from damage caused by high point loads and oil/grease contamination
  • The skates are maintenance free and are fitted with handles for ease of carrying and positioning. The platforms of the skates are fitted with a rubber surface which helps stability and protect the object being moved
  • The adjustable skates are actually 1 pair of 2 skates. They are connected by two steel rods making one adjustable skate
  • Conforms to CE safety standards
Model CM60 CM120 CM240
Capacity Per Pair(tonne) 6 12 24
Type of Roller Nylon Nylon Steel
Number of Roller (pcs) 8 12 16
Skate Dimensions LxWxH(mm) 300x250x115 360x220x115 360x220x115
Net Weight (kg) 30 38 65
Enquire about this item
Code: 685 GP Tirfor with Rope
  • The puller is operable in the vertical, horizontal and diagonal planes
  • Accurate operation
  • Virtually maintenance-free
  • Body made of high strength cast aluminium with low weight
  • Shearing pin breaks at 25% overload and operating lever bends at an overload of approximately 50%
  • Shearing pin can be replaced under full load
  • Spare shearing pins are located in the transport handle or in the operating lever
  • Conforms to CE safety standards
Model GP-0.8 GP-1.6 GP-3.2
WLL vertical (kg) 800 1600 3200
Hand effort max (kg) 32 42 44
Lever length 800 1200 1200
Wire rope dia (mm) 8.3 11 16
Weight without rope (kg) 6 11.9 22
Weight of 20mtr rope (kg) 6 12 22
A (mm) 426 545 660
B (mm) 64 97 116
C (mm) 235 280 325
D (mm) 59 72 94
E (mm) 170 190 220
Enquire about this item
Code: 689 HBC Beam Clamp
  • Capacity 1-10 tonne
  • Clamp jaw is designed to reduce flange stress by distributing load away from I-Beam flange edge
  • Can be mounted easily with threaded handle
  • Fits a wide range of flange widths and beams
  • Suspension bar provides lower headroom
  • Conforms to CE safety standards
Model HBC-1 HBC-2 HBC-3 HBC-5 HBC-10
Capacity (kg) 1000 2000 3000 5000 10000
Flange Width (mm) 75-220 75-220 80-320 80-320 90-310
Dimensions Max.A 260 260 354 354 310
Min. B 180 180 235 235 268
Max.B 360 360 490 490 480
C 64 74 103 110 118
D 5 6 8 10 12
E 215 215 260 260 275
Max.F 155 155 225 225 185
Min. F 102 102 140 140 133
Min.G 25 25 45 45 66
H 22 22 24 28 38
Net Weight (kg) 4.5 5 10.5 11 16
Enquire about this item
Code: 692 HGT Geared Trolley
  • Double sealed ball bearings
  • Built-in bumper guards
  • Adjustable to fit various sizes of flange and I-Beams
  • Use on straight or curved track
  • Can be installed or removed at any point along the track
  • Conforms to CE safety standards
Model Capacity (tonne) Beam Flange Dimensions (mm) Net
Width Weight
(mm) O A B C D E F G H T R S L X P N U I (kg)
HGT05 0.5 64-140 128 22 24 230 212 58 82 102 28 44 6 95 15 12 26 10 24 113.5 14
HGT10 1 64-140 143 25 30 254 255 75 102 118 25 50 8 118 15 13.5 28 12 30.5 112.5 19
HGT20 2 76-165 172 27 36 294 302 90 122 137 27 60 10 145 20 16 34 14 36 112.5 28
HGT30 3 76-203 212 31 42 344 344 110 142 157 32 78 12 180 26 16 38 16 45 135 40
HGT50 5 88-203 254 36 48 360 378 122 156 172 34 90 16 220 35 17 44 20 60 136 65
HGT100 10 125-203 320 46 60 403 445 151 188 200 35 94 25 285 45 18 48 25 82 160 103
HGT200 20 144-203 385 68 60 475 642 200 274 300 55 94 30 302 70 37 60 35 110 151.5 245
 
Enquire about this item
Code: 695 LW Lever Hoist
  • Capacity from 0.75 to 6 tonne
  • Top quality range
  • Industrial lifting and pulling applications
  • New design drop forged hooks with safer tip and slowly bending performance
  • Conforms to CE safety standards
Model LW75 LW100 LW150 LW200 LW300 LW600
Lifting Capacity (tonne) 0.75 1 1.5 2 3 6
Standard Lift (m) 1.5 1.5 1.5 1.5 1.5 1.5
Load Chain (Dia x Pitch) (mm) 6 x 18 6 x 18 8 x 24 8 x 24 10 x 30 10 x 30
No. of Falls of Load chain 1 1 1 1 1 2
Min. Distance Between Hooks A 321 328 376 385 475 495
Dimensions (mm) B 23.8 25.6 28.6 32.5 42.9 50.8
C 28.5 29.5 31.8 33.5 39.7 43
D 17.5 18.6 20.6 22.8 31.8 34.5
E 279 279 413 413 413 413
F 111 111 121 121 191 191
G 56 58 60 65 86 94
H 56 56 60 60 106 106
J 151 151 175 175 200 200
K 60 60 76 76 86 86
L 90 90 100 100 116 116
Net weight (kg) 6.8 7.1 12.2 12.8 20.4 25.1
Enquire about this item
Code: 699 MH Chain Block
  • Heavy duty and compact design to meet all pertinent world standards
  • Reliable disc brake and premium grade alloy load chain
  • Drop-forged and expertly heat treated for greater strength and long wearing
  • Conforms to CE safety standards
Model MH05 MH10 MH15 MH20 MH30 MH50 MH100 MH200
Capacity (tonne) 0.5 1 1.5 2 3 5 10 20
Standard lifting height 3 3 3 3 3 3 3 3
Testing load (KN) 6.3 12.5 18.8 25 37.5 62.5 125 250
Effort force to Max. Load (N) 231 309 320 353 275.5 414 414 828
Diameter of Load Chain (mm) 6 6 8 8 8 10 10 10
No. of columns of Load chain 1 1 1 1 2 2 4 8
Dimensions a (mm) 131 140 161 161 161 186 207 215
Dimensions b (mm) 127 158 174 187 199 253 398 650
Dimensions c (mm) 270 317 399 414 465 636 798 890
Net Weight (kg) 10 12 19 20 27 45.5 83 193
Extra weight per meter of extra lift (kg) 1.7 1.7 2.3 2.3 3.7 5.6 9.7 19.4
 
Enquire about this item
Code: 703 PB Pulley Blocks
  • Used to change the direction of a rope with a cast steel sheave
  • Manufactured in accordance with European Standard EN13157:2003 and Machinery Directive 98/37/EC
  • One side of the pulley block is hinged and can be opened for easy and quick positioning of the rope on the sheave
  • Swinging the hook in the direction of pull securely locks the block
  • The sheaves are high quality cast steel and have machined grooves
Model Working load Hook hatch Rope dia. Dimensions (mm) Weight
(tonne) (mm) (mm) B B1 B2 H H1 H2 H3 D1 D2 R (Kg)
PB10 1 23 7 118 76 17 23 305 200 23 85 105 4 3.3
PB20 2 27 13 119 92 24 27 425 263 30 150 190 7 8.9
PB32 3.2 31 15 230 108 28 31 496 295 40 180 220 9 15.5
PB64 6.4 42 18 270 116 35 42 655 375 47 210 260 10 26.5
 
Enquire about this item
Code: 707 PT Push Trolley
  • Adapts to wide range of beam adjustments by thread
  • Versatile all-purpose trolley for use with any hook suspended hoist
  • Conforms to CE safety standards
Model Capacity Beam Flange Beam Flange Dimensions Weight
kg Width Thick A G D1 D2 H H1 L L1 R D  
  (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
PT05-A 500 50-203 25 77 16 25 30 71.5 30.5 260 130 60 146 8
PT05-B 500 160-300 40 92 16 25 30 71.5 45.5 260 130 60 187 10.6
PT10-A 1000 50-203 25 82.5 17 30 35 71.5 30.5 260 130 60 150 9
PT10-B 1000 160-300 40 97.5 17 30 35 71.5 45.5 260 130 60 187 12
PT20-A 2000 66-203 25 98.5 22 40 47 95.5 30.5 310 150 80 155 16
PT20-B 2000 160-300 40 113.5 22 40 47 95.5 45.5 310 150 80 189.5 19.3
PT30-A 3000 74-200 25 114 26 48 58 131 30 390 180 112 160 32
PT30-B 3000 160-300 40 129 26 48 58 131 45 390 180 112 191.5 35.8
PT50-A 5000 90-203 25 132.5 33 60 70 142.5 30 450 209 125 167.5 48
PT50-B 5000 180-300 40 147.5 33 60 70 142.5 45 450 209 125 191.5 52.2
 
Enquire about this item
Code: 711 SF Fixed Skates
  • Shifting skates can be used wherever heavy objects have to be moved. The load can be lifted using either the roller crowbar or a jack, allowing the skates to be easily positioned
  • The large diameter sealed nylon rollers ensure ease of movement and spread the load, protecting high quality floors from damage caused by high point loads and oil/grease contamination
  • The skates are maintenance free and are fitted with handles for ease of carrying and positioning. The platforms of the skates are fitted with a rubber surface which helps stability and protect the object being moved
  • Conforms to CE safety standards
Model SF10 SF20 SF25 SF30 SF60
Capacity Tonne 1 2 2.5 3 6
No. of rollers pcs 4 8 2 4 6
No. of axles pcs 2 2 2 2 3
Roller size                   (Dia x W) mm 100x35 100x35 85x90 85x85 85x85
Skate dimensions (L x W x H) mm 330x220x120 330x220x120 210x100x105 330x300x120 260x230x105
Skate weight kg 7 8 4 9.5 12
Enquire about this item
Code: 713 SK Machine Moving Skates
  • For short, variable transportation distances
  • For installation works and movement of heavy loads
  • The steering handle gives you precise control making it easy to manoeuvre large machinery or into tight areas
  • Moving speed not exceeding 5m/min
  • Minimum turning cycle is 3m
Model SK20 SK30 SK60
Capacity (tonne) 20 30 60
Length Support (mm) 120 120 130
Width Support (mm) 120 120 130
Total Height (mm) 108 117 140
Enquire about this item
Code: 716 ST Steerable Skate
  • Shifting skates can be used wherever heavy objects have to be moved. The load can be lifted using either the roller crowbar or a jack, allowing the skates to be easily positioned
  • The large diameter sealed nylon rollers ensure ease of movement and spread the load, protecting high quality floors from damaged caused by high point loads and oil/grease contamination
  • The skates are maintenance free and are fitted with handles for ease of carrying and positioning. The platforms of the skates are fitted with a rubber surface which helps stability and protect the object being moved
  • They incorporate a 1mtr drawbar and a platform that swivels on a thrust bearing allowing movement around bends
  • Conforms to CE safety standards
Model ST30 ST60 ST120
Capacity (tonne) 3 6 12
Type of Roller Nylon Nylon Steel
Number of Roller (pcs) 4 8 8
Roller Size DiaxW (mm) 85x90 85x90 83x85
Dimensions LxWxH (mm) 310x255x105 630x400x115 630x400x115
Net Weight (kg) 15 50 66
Enquire about this item
Code: 718 WH Welding Hooks
  • The welding hooks are universal attachments for use on trucks, excavators, spreader beams and low loaders etc…
  • The hook can be welded without any special preparation, e.g. pre-warming
  • The forged safety latch has high lateral stability and ergonomic form
  • The hook and safety latch are epoxy resin powder coated for added corrosion protection
  • Used on all hot rolled structural steel plates and sections up to a surface hardness of 300 Brinell / 32 Rockwell C
  • Never lift under 20% of the rated capacity
  • Note: A full load test must be carried out on the lifting application before use after welding
  • Conforms to CE safety standards
Model Capacity Weldingsize Dimensions mm Weight
(Kg) a (mm) L x B L1 L2 L3 L4 L5 (Kg)
WH10 1 4 90 x 25 17 24 6 76 22 0.4
WH30 3 5 130 x 35 24 29 8 105 28 1.25
WH50 5 5 160 x 45 30 37 10 132 47 2.35
WH80 8 7 170 x50 40 47 10 138 50 3.6
Enquire about this item
Code: 887 CY Self-Balance Crane Fork
  • No slings or chains necessary
  • Crane operator will not need to leave the cab
  • Forks will remain horizontal when loaded and unloaded
  • Adjustable fork width and height
ModelCapacity (Min Required 20% of Load)Adjustment of TinesMax Internal HeightWeight
CY10200-1000Kgs350-9001100 to 1600mm140Kgs
CY20400-2000Kgs400-9001300 to 2000mm220Kgs
CY30600-3000Kgs450-9001300 to 2000mm280Kgs
CY501000-5000Kgs500-19001300 to 2000mm380Kgs
Enquire about this item
Code: 890 EX Fork Extensions
  • Heavy duty steel construction, fit onto forks up to 50mm (2”) thickness
  • Steel retaining strap prevents fork extensions from sliding off forks during use
  • Sold in pairs only
  • Capacity is reduced the further you extend from the forks. General rule is to reduce the capacity by 77kg per 25mm extension on a 2000kg forklift, 73kg per 25mm extension on a 2300kg forklift and 70kg per 25mm extension on a 2500kg forklift
ModelWidthLengthWeight
EX724100mm183053Kgs
EX844100mm213462Kgs
EX964100mm243570Kgs
EX605125mm152549Kgs
EX725125mm183059Kgs
EX825125mm208567Kgs
EX845125mm213469Kgs
EX965125mm243579Kgs
EX606150mm152553Kgs
EX726150mm183064Kgs
EX846150mm213475Kgs
EX966150mm243585Kgs
Enquire about this item
Code: 892 MK Fork Hook
  • Converts forklift into a mobile crane in seconds
  • Adjustable along the length of the fork
  • Secured to forks by thumb screw
  • Swivel hook includes safety latch
ModelCapacity (Kgs)Dimensions Fork CentreDimensions Fork SizeWeight
MK101000250mm140 x 65mm14Kgs
MK252500450mm150 x 70mm28Kgs
MK505000450mm190 x 90mm49Kgs
Enquire about this item
Code: 894 NK Forklift Maintenance Platform
  • For overhead access and maintenance
  • Spring loaded inward opening door with safety latch for safety entry
  • Unit is secured to the fork with heel pins and chain
  • Slip-resistant floor with drainage holes
  • Portable and easy to assemble
  • Wheel fitted for easy manoeuvring
  • High side handrail, swinging gate and safety mid rail
  • Safety screen shields worker from forklift mast
  • Conforms to health and safety guidance PM28 and GN48 standard
ModelCapacity (Kgs)Deck SizePerson QuantityWeight
NK30A300950 x 950mm190Kgs
NK30B3001200 x 1200mm2110Kgs
NK30C3001000 x 1000mm2100Kgs
Enquire about this item
Code: 897 TLB Telescopic Fork Mounted Jib
  • Convert a forklift truck into a mobile crane to reach and transport long and awkward loads from inaccessible locations
  • Verify load centre of forklift truck
  • Safety chain welded to boom has grab holes for anchoring jib boom to forklift truck
  • Zinc plated fork heel pin for safe forklift attachment
  • Supplied complete with 1 safety swivel hook with bow shackle and 1 rigid hook
ModelCapacity (Kgs)Min Lift PointMax Lift PointWeight
TLB03600 to 3000kg756mm3741mm190kg
Enquire about this item
Code: 900 TLB Telescopic Fork Mounted Tilting Jib
  • Secured to forklift by utilising front/rear hooks and safety chain
  • Fully adjustable
Model Capacity (Kgs) Min Lift Point Max Lift Point Weight
TLB01 590 up to 3000 740mm 3726mm 230Kgs
Enquire about this item