Tiger
Code: 905
BC Adjustable Beam Clamp with Suspension Bar
Capacity from 1 tonne to 10 tonne
Enquire about this item
- Quick and versatile rigging point for hoist equipment
- Low headroom because of the built in anchor point
- Multidirectional adjusting screw spindle for easy attachment and safe and secure grip
- Wide beam flange adjustment range
- Safety factor up to 5 times SWL
- Meet requirements within BS EN 13155:2003+A1:2009 and AS4991
- Complies with the essential health and safety requirements of the Machinery Directive 2006/42/EC
Product | BC-0100 | BC-0200 | BC-0300 | BC-0500 | BC-1000 | |
Capacity | (tonne) | 1 | 2 | 3 | 5 | 10 |
A | 72-210 | 75-210 | 73-305 | 73-305 | 90-330 | |
B | 182-328 | 182-328 | 214-460 | 214-460 | 289-496 | |
Dimensions | C | 77 | 85 | 107 | 121 | 135 |
(mm) | D | 26 | 26 | 35 | 35 | 36 |
E | 190 | 190 | 240 | 240 | 277 | |
F | 144-117 | 144-117 | 244-179 | 224-175 | 231-182 | |
G | 52-38 | 52-38 | 58-40 | 58-40 | 75-58 | |
J | 20ø | 20ø | 22ø | 28ø | 38ø |
Code: 911
BCA Adjustable Angle Beam Clamp
Capacity available: 1t and 3t
Enquire about this item
- Quick and versatile rigging point for hoisting equipment when attached to overhead steel angle section approved for lifting applications
- Shackle suspension point
- V shaped clamping jaws ensures safe and secure grip
- Designed to accommodate a wide range of steel angle sections
- No tools required – Integrated adjusting screw spindle
- Meet requirements within BS EN 13155:2003+A1:2009 and AS4991
- Complies with the essential health and safety requirements of the Machinery Directive 2006/42/EC
Product | BCA-0100 | BCA-0300 | |
Capacity | (tonne) | 1 | 3 |
A | 6 | 10 | |
B | 76.5 | 106.5 | |
C | 81 | 112 | |
Dimensions | D | 83 | 104 |
(mm) | E | 206 | 343 |
G | 15 | 25.4 | |
H | 258 | 490 | |
J | 16 | 22 | |
K | 38-101 | 101-203 | |
Weight | (kg) | 6.5 | 23.4 |
Code: 915
BCF Fixed Jaw Heavy Duty Beam Clamp with Shackle
Capacity range from 1t to 10t
Enquire about this item
- Quick and versatile rigging point for hoist equipment
- Shackle suspension points
- Suitable for pulling and lifting at angles across the beam
- Up to 45° side loading and 15° cross loading
- Highly flexible – for lifting, pulling or as a semi-permanent anchor point
- Evenly distributed loads achieved through maximum jaw surface area
- Multi-directional adjusting screw spindle ensures a high clamping force to the various flange sizes within its capacity
- Safety factor up to 5 times SWL
- Meet requirements within BS EN 13155:2003+A1:2009 and AS4991
- Complies with the essential health and safety requirements of the Machinery Directive 2006/42/EC
Product | BCF-0100 | BCF-0200 | BCF-0300 | BCF-030S | BCF-0500 | BCF-050S | BCF-1000 | |
Capacity | (tonne) | 1 | 2 | 3 | 3 | 5 | 5 | 10 |
A | 75-195 | 75-195 | 100-350 | 75-190 | 100-310 | 75-190 | 120-350 | |
B | 206-321 | 206-321 | 223-472 | 216-325 | 223-433 | 216-325 | 282-508 | |
C | 105 | 105 | 140 | 140 | 140 | 140 | 210 | |
D | 12 | 12 | 15 | 12 | 15 | 12 | 15 | |
Dimensions | E | 190 | 190 | 270 | 190 | 270 | 190 | 300 |
(mm) | F | 257-230 | 268-240 | 364-300 | 267-236 | 370-321 | 272-241 | 400-340 |
G | 43-36 | 43-36 | 54-46 | 38-30 | 54-48 | 38-30 | 60-52 | |
H | 16 | 18 | 22 | 22 | 27 | 27 | 32 | |
J | 21ø | 21ø | 27ø | 27ø | 27ø | 27ø | 37ø | |
K | 79 | 88 | 110 | 110 | 124 | 124 | 183 | |
L | 83.5 | 94.5 | 105.5 | 105.5 | 111 | 111 | 120 | |
Weight | (kg) | 5.96 | 7.12 | 13.28 | 10.4 | 15.72 | 12.02 | 27.3 |
Angle from vertical | 0° | 0-15° | 15-30° | 30-45° | |
Reduction Factor | Nil | 17% | 34% | 50% | |
Product Code | WLL | WLL | WLL | WLL | |
BCF-0100 | 1000 kg | 830 kg | 660 kg | 500 kg | |
BCF-0200 | 2000 kg | 1660 kg | 1320 kg | 1000 kg | |
BCF-0300 | 3000 kg | 2500 kg | 2000 kg | 1500 kg | |
BCF-030S | 3000 kg | 2500 kg | 2000 kg | 1500 kg | |
BCF-0500 | 5000 kg | 4100 kg | 3300 kg | 2500 kg | |
BCF-050S | 5000 kg | 4100 kg | 3300 kg | 2500 kg |
Code: 920
BCS Adjustable Beam Clamp with Shackle
Capacity range from 1t to 10t
Enquire about this item
- Quick and versatile rigging point for hoist equipment
- Shackle suspension point
- Highly flexible – For lifting, pulling or as an anchor point
- Multidirectional adjusting screw spindle for easy attachment and safe and secure grip
- Wide beam flange adjustment range
- Safety factor up to 5 times SWL
- Meet requirements within BS EN 13155:2003+A1:2009 and AS4991
- Complies with the essential health and safety requirements of the Machinery Directive 2006/42/EC
Product | BCS-0100 | BCS-0200 | BCS-0300 | BCS-0500 | BCS-1000 | |
Capacity | (tonne) | 1 | 2 | 3 | 5 | 10 |
A | 75-210 | 75-210 | 75-305 | 75-305 | 90-330 | |
B | 182-328 | 182-328 | 214-460 | 214-460 | 289-496 | |
C | 92 | 96 | 115 | 123 | 181 | |
D | 26 | 26 | 35 | 35 | 36 | |
Dimensions | E | 190 | 190 | 240 | 240 | 300 |
(mm) | F | 238-212 | 238-212 | 335-285 | 335-285 | 383-340 |
G | 52-38 | 52-38 | 58-40 | 58-40 | 75-58 | |
H | 19 | 19 | 22 | 22 | 32 | |
J | 20ø | 20ø | 23ø | 23ø | 34ø | |
K | 51 | 51 | 57 | 57 | 80 | |
L | 73 | 73 | 85 | 85 | 120 | |
Weight | (kg) | 4.6 | 5.4 | 10 | 12.4 | 26.3 |
Angle from vertical | 0° | 0-15° | 15-30° | 30-45° | |
Reduction Factor | Nil | 17% | 34% | 50% | |
Product Code | WLL | WLL | WLL | WLL | |
BCS-0100 | 1000 kg | 830 kg | 660 kg | 500 kg | |
BCS-0200 | 2000 kg | 1660 kg | 1320 kg | 1000 kg | |
BCS-0300 | 3000 kg | 2500 kg | 2000 kg | 1500 kg | |
BCS-0500 | 5000 kg | 4100 kg | 3300 kg | 2500 kg | |
BCS-1000 | 10000 kg | 8300 kg | 6600 kg | 5000 kg |
Code: 924
CCBT Combination Trolley
Capacity from 0.5 tonne to 3 tonne (single bar) or to 10 tonne (twin bar)
Single Bar Specifications
Twin Bar Specifications
Enquire about this item
- Ideal for locations where headroom is limited
- Geared and plain trolley versions available
- Twin bar or single bar trolley options
- Extended beam width available
- Corrosion or spark resistant versions available
- Fully complies with the essential health and safety requirements of the Machinery Directive 2006/42/EC
Single Bar Specifications
Product Code | Capacity (tonne) | Dimensions (mm) |
Mass
kg @ std HOL |
D -
Extended width (mm) |
||||||
A | B | C | H | D (track width) |
Plain | Geared | ||||
Plain | Geared | 3mtr HOL |
3mtr HOL |
|||||||
CCBTPS-0500 CCBTGS-0050 |
0.5 | 195 | 106 | 165 | 106 | 310 | 62-128 | 16.2 | 20.2 | 62-203 |
CCBTPS-0100 CCBTGS-0100 |
1 | 213 | 113 | 170 | 113 | 350 | 62-128 | 19.8 | 23.7 | 62-203 |
CCBTPS-0200 CCBTGS-0200 |
2 | 236 | 136 | 182 | 136 | 450 | 88-154 | 33.2 | 37.7 | 88-230 |
CCBTPS-0300 CCBTGS-0300 |
3 | 277 | 146 | 187 | 146 | 530 | 88-154 | 48.52 | 53.8 | 88-230 |
Product Code | Capacity (tonne) | Dimensions (mm) |
Mass kg @ std HOL |
D - Extended width (mm) |
||||||
A | B | C | H | D (track width) |
Plain | Geared | ||||
Plain | Geared | 3mtr HOL |
3mtr HOL |
|||||||
CCBTPT-0500 CCBTGT-0050 |
0.5 | 179 | 109 | 168 | 109 | 316 | 62-128 | 17.1 | 21.1 | 62-203 |
CCBTPT-0100 CCBTGT-0100 |
1 | 195 | 111 | 178 | 111 | 342 | 62-128 | 20.4 | 24.4 | 62-203 |
CCBTPT-0200 CCBTGT-0200 |
2 | 235 | 134 | 184 | 134 | 446 | 88-154 | 33.9 | 38.4 | 88-230 |
CCBTPT-0300 CCBTGT-0300 |
3 | 263 | 145 | 184 | 145 | 435 | 88-154 | 45.88 | 58.38 | 88-230 |
CCBTPT-0500 CCBTGT-0500 |
5 | 307 | 169 | 206 | 169 | 545 | 106-194 | 69 | 74.6 | 106-305 |
CCBTPT-1000 CCBTGT-1000 |
10 | 429 | 252 | 327 | 252 | 730 | 150-320 | 185 | 200 | - |
Code: 933
PROLH Lever Hoist
Capacity range from 800 kg to 10,000 kg
Enquire about this item
- Now available with slipping clutch overload protection
- Equipped with our unique dual brake mechanism
- New twin pawl ratchet brake design allows for very fine adjustments on the lifting handle
- Light load tested and certified at 2% of the rated capacity
- Adaptable to use both inverted and horizontally
- Each hoist is individually proof tested at 1.5 times the rated capacity
- Using only the highest quality alloy calibrated load chains according to EN 818-7 and ISO 16872
- Lightweight and portable
- Individual spares readily available
- Operating temperature of -40° to +50°C
- All major parts are heat treated and precisely machined
- Finished in high quality powder coat paint offering excellent corrosion protection
- Chain be chained up to meet exact requirements
- Also available with stainless steel load chain or spark resistant hooks
- Units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI/ASME B30.21-2005, AS1418.2 and SANS 1636
- Complies with the essential health and safety requirements of the Machinery Directive 2006/42/EC
Product | PLH-0075 | PLH-0150 | PLH-0300 | PLH-0600 | PLH-1000 | |
Capacity | (tonne) | 0.8 | 1.5 | 3 | 6 | 10 |
Effort | (kg) | 22 | 26 | 38 | 40 | 47 |
A | 128 | 154 | 182 | 242 | 370 | |
B | 240 | 360 | 360 | 360 | 360 | |
Dimensions | C | 275 | 320 | 400 | 570 | 630 |
(mm) | D | 158 | 172 | 195 | 195 | 195 |
E | 99 | 104 | 108 | 108 | 108 | |
F | 30 | 38 | 43 | 57 | 71 | |
F1 | 26 | 34 | 38 | 52 | 56 | |
Load | Dia (mm) | 6.3Ø | 7.1Ø | 10Ø | 10Ø | 10Ø |
Chain | Falls | 1 | 1 | 1 | 2 | 3 |
Standard HOL | (m) | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
Mass @ std HOL | (kg) | 7.6 | 10.7 | 18.2 | 29.7 | 45.7 |
Code: 938
TCB Chain Block
Capacity from 500 kg to 30,000 kg
Enquire about this item
- New 8t, 15t and 30t capacity units available
- Rugged steel body constructions
- Lightweight and portable
- Double cover protection for brake chamber
- Drop forged and heat treated alloy hooks
- High quality alloy calibrated load chain
- Safe reliable independent twin pawl mechanical brake
- Certified 2% light load protection
- Heat treated alloy steel triple spur gears and pinion shaft
- Operating temperature of -40° to +50°c
- Proof tested to 1.5 times rated capacity
- Can be chained to meet your requirements
- Individual spares readily available
- Suitable for underground mining use
- Tested and certified for “fleeting” and “cross-hauling” applications up to 45°
- Overload protection available
- Also available with stainless steel load chain
- Meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI/ASME B30.21-2005, AS14182 and SANS 1636.
- Fully complies with the essential health and safety requirements of the Machinery Directive 2006/42/EC
Product | CB-0050 | CB-0100 | CB-0150 | CB-0200 | CB-020L | CB-0300 | CB-030T | CB-0500 | CB-0800 | CB-1000 | CB-1500 | CB-2000 | CB-3000 | |
Capacity | (tonne) | 0.5 | 1 | 1.5 | 2 | 2 | 3 | 3 | 5 | 8 | 10 | 15 | 20 | 30 |
Effort | (kg) | 21 | 25 | 32 | 34 | 32 | 38 | 34 | 37 | 37 | 40 | 41 | 43 | 42 |
A | 89 | 89 | 93 | 98 | 93 | 109 | 93 | 98 | 78.5 | 109 | 110 | 160 | 220 | |
B | 67 | 67 | 73 | 77 | 73 | 84 | 73 | 77 | 102 | 84 | 84 | 90 | 220 | |
Dimensions | D | 50 | 63 | 75 | 85 | 75 | 98 | 60 | 120 | 140 | 153 | 225 | 140 | 390 |
(mm) | E | 80 | 87 | 105 | 115 | 105 | 157 | 150 | 210 | 230 | 263 | 374 | 350 | 390 |
F | 29 | 33 | 38 | 42 | 42 | 42 | 42 | 54 | 54 | 60 | 64 | 90 | 100 | |
F1 | 26 | 28 | 34 | 38 | 38 | 38 | 38 | 52 | 52 | 54 | 57 | 70 | 88 | |
G | 305 | 340 | 385 | 420 | 399 | 550 | 465 | 575 | 745 | 660 | 840 | 1050 | 1200 | |
Load | Dia (mm) | 6.3Ø | 6.3Ø | 7.1Ø | 8.0Ø | 7.1Ø | 10.0Ø | 7.1Ø | 8.0Ø | 8.0Ø | 10.0Ø | 10.0Ø | 10.0Ø | 10.0Ø |
Chain | Falls | 1 | 1 | 1 | 1 | 1 | 1 | 2 | 3 | 4 | 3 | 5 | 6 | 10 |
Standard HOL | (m) | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
Code: 946
TLH Lever Hoist
Capacity range from 250 kg to 10,000 kg
Enquire about this item
- Rugged steel body construction
- Lightweight and portable
- 360° handle rotation
- Short stroke and low lever pulling effort
- Easy single-hand “freewheeling” operation
- Drop forged & heat treated alloy hooks
- High quality alloy calibrated load chain
- Safe reliable twin pawl mechanical brake
- Guaranteed light load protection
- Heat treated alloy steel triple spur gears and pinion shaft
- Heavy duty chain end stop
- Operating temperature of -40° to + 50°C
- Proof tested to 1.5 times rated capacity
- 1.5m height of lift as standard but can be chained to exact requirements
- Individual spares readily available
- Also available with stainless steel load chain
- Units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI/ASME B30.21-2005, AS1418.2 and SANS 1636
- Complies with the essential health and safety requirements of the Machinery Directive 2006/42/EC
Product | LH-0025 | LH-0050 | LH-0075 | LH-0150 | LH-0300 | LH-0600 | LH-1000 | |
Capacity | (tonne) | 0.25 | 0.5 | 0.75 | 1.5 | 3 | 6 | 10 |
Effort | (kg) | 30 | 34 | 22 | 26 | 38 | 40 | 47 |
A | 60 | 75 | 128 | 154 | 182 | 242 | 370 | |
B | 156 | 276 | 240 | 360 | 360 | 360 | 360 | |
Dimensions | C | 245 | 270 | 275 | 320 | 400 | 570 | 630 |
(mm) | D | 82 | 100 | 158 | 172 | 195 | 195 | 195 |
E | 63 | 75 | 99 | 104 | 108 | 108 | 108 | |
F | 26 | 29 | 30 | 38 | 42 | 54 | 60 | |
F1 | 22 | 26 | 26 | 34 | 38 | 52 | 56 | |
Load | Dia (mm) | 4Ø | 5Ø | 6.3Ø | 7.1Ø | 10Ø | 10Ø | 10Ø |
Chain | Falls | 1 | 1 | 1 | 1 | 1 | 2 | 3 |
Standard HOL | (m) | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
Mass @ std HOL | (kg) | 2.2 | 3.5 | 7.4 | 10.1 | 18.2 | 29.3 | 46 |