Grade 50
WORKING LOAD LIMIT TABLE FOR GRADE 50 STAINLESS STEEL CHAIN SLINGS (T) | ||||||
Chain Dia.(mm) | Single Leg | Double Leg | Three / Four Leg | Endless | ||
90 | 0-45 | 45-60 | 0-45 | 45-60 | ||
F.O.S. 1.4 | F.O.S. 1.0 | F.O.S. 2.1 | F.O.S. 1.5 | |||
6 | 0.70 | 1.00 | 0.70 | 1.47 | 1.05 | 1.12 |
8 | 1.20 | 1.70 | 1.20 | 2.50 | 1.80 | 1.92 |
10 | 1.60 | 2.25 | 1.60 | 3.36 | 2.40 | 2.56 |
13 | 2.70 | 3.80 | 2.70 | 5.70 | 4.05 | 4.32 |
16 | 5.00 | 7.10 | 5.00 | 10.00 | 7.50 | 8.00 |
18 | 6.30 | 9.00 | 6.30 | N/A | N/A | 10.00 |
CHAIN SLING SELECTION
In this website, the maximum working load limit for each size of chain is shown. These ratings are based on ideal conditions, however in practice, working conditions may vary widely. All lifting applications should be assessed by a competent person in order to establish the size and type of sling required.
MULTI-LEG SLING ANGLE
In the case of multi-leg slings, the angle between the legs is critical. The actual tension on each leg increases as shown in the diagram opposite. For this reason all general purpose chain slings are given a rating based upon use at a range of angles up to 45° to the vertical. A reduced rating is also given for use in the range of anglesbetween 45-60°. Chain Slings should never be used at angles greater than 60° to vertical.
HEAD ROOM
The distance between the crane hook and the load is known as the "Head Room". If a specific head room is required, the "Reach" of the chain sling must increase as the angle between the legs increases as shown opposite.SLING REACH
The reach of a chain sling is the distance between bearing points of the upper and lower terminal fittings. This distance, commonly known as the "Effective Working Length (EWL)" should be quoted when ordering slings. Shortening clutches may be fitted to a sling, making the reach adjustable, hence increasing the versatility of the sling.
PRODUCTION FEATURES
Manufactured in U.K. from corrosion resistant Stainless Steel to EN 10088 / 1.4404 (Marine Grade 316L).QUALITY FEATURES
- Full traceability for all components used in manufacturing process
- All components embossed with our manufacturers mark and Batch Number.
- All components are Proof Load Tested to 2.0 x W.L.L.
- Factor of Safety: 6:1
- Finish: Polished
Part Code |
Chain Size (mm) |
Dimensions (mm) |
W.L.L. (t) |
Weight Each (Kg) |
|||
---|---|---|---|---|---|---|---|
d |
D |
J |
L |
||||
201.20.10 |
6 |
10 |
9.5 |
19 |
38 |
800 Kg |
0.14 |
201.20.13 |
7/8 |
12 |
12.7 |
26 |
52 |
1.25 |
0.33 |
201.20.14 |
10 |
16 |
14.3 |
29 |
58 |
1.80 |
0.56 |
201.20.16 |
13 |
20 |
16 |
32 |
64 |
2.80 |
0.76 |
201.20.25 |
16 |
27 |
25.4 |
50 |
100 |
5.00 |
2.60 |
PRODUCTION FEATURES
- Manufactured in Europe from corrosion resistant Stainless Steel to EN 10088 / EN 10027-2 / 1.4404 (Marine Grade 316L).
QUALITY FEATURES
- Full traceability for all components used in manufacturing process
- All components embossed with our manufacturers mark and Batch Number.
- All components are Proof Load Tested to 2.5 x W.L.L.
- Factor of Safety: 4:1
- Finish: Polished
Part Code |
Chain Size (mm) |
Dimensions (mm) |
W.L.L. (t) |
Weight Each (Kg) |
||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
a |
b |
c |
d |
e |
f |
g |
h |
i |
||||
I5-043/S-06 |
6 |
76 |
7 |
25 |
15 |
19 |
27 |
73 |
108 |
8 |
700 Kg |
0.29 |
I5-043/S-08 |
8 |
95 |
9 |
28 |
20 |
22 |
32 |
85 |
133 |
9 |
1.20 |
0.55 |
I5-043/S-10 |
10 |
113 |
11 |
28 |
24 |
28 |
41 |
106 |
164 |
13 |
1.60 |
0.97 |
I5-043/S-13 |
13 |
138 |
15 |
38 |
32 |
40 |
52 |
133 |
208 |
16 |
2.70 |
1.86 |
I5-043/S-16 |
16 |
180 |
18 |
69 |
40 |
57 |
64 |
190 |
300 | 19 |
5.00 |
4.90 |
PRODUCTION FEATURES
- Manufactured in Europe from corrosion resistant Stainless Steel to EN 10088 / EN 10027-2 / 1.4404 (Marine Grade 316L).
QUALITY FEATURES
- Full traceability for all components used in manufacturing process
- All components embossed with our manufacturers mark and Batch Number.
- All components are Proof Load Tested to 2.5 x W.L.L.
- Factor of Safety: 4:1
- Finish: Polished
Part Code |
Chain Size (mm) |
Dimensions (mm) |
W.L.L. (t) |
Weight Per M (Kg) |
||||||
---|---|---|---|---|---|---|---|---|---|---|
a |
b |
c |
d |
e |
f |
g |
||||
I5-015-06 |
6 |
8 |
43 |
11 |
14 |
45 |
11 |
16 |
700 Kg |
0.10 |
I5-015-07/8 |
7/8 |
9 |
52 |
14 |
18 |
55 |
14 |
20 |
1.20 |
0.16 |
I5-015-10 |
10 |
13 |
70 |
16 |
25 |
73 |
18 |
25 |
1.60 |
0.36 |
I5-015-13 |
13 |
18 |
85 |
19 |
32 |
92 |
25 |
28 |
2.70 |
0.73 |
PRODUCTION FEATURES
- Manufactured in Europe from corrosion resistant Stainless Steel to EN 10088 / EN 10027-2 / 1.4404 (Marine Grade 316L).
QUALITY FEATURES
- Full traceability for all components used in manufacturing process
- All components embossed with our manufacturers mark and Batch Number.
- All components are Proof Load Tested to 2.5 x W.L.L.
- Factor of Safety: 4:1
- Finish: Polished
Part Code |
Chain Size (mm) |
Dimensions (mm) |
W.L.L. (t) |
Weight Each (Kg) |
||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
a |
b |
c |
d |
e |
f |
g |
h |
i |
||||
I5-041-07/8 |
7/8 |
52 |
20 |
20 |
10 |
33 |
23 |
46 |
108 |
8 |
1.20 |
0.32 |
I5-041-10 |
10 |
53 |
29 |
29 |
12 |
41 |
28 |
58 |
123 |
10 |
1.60 |
0.53 |
I5-041-13 |
13 |
89 |
43 |
43 |
15 |
56 |
40 |
78 |
192 |
18 |
2.70 |
1.64 |
PRODUCTION FEATURES
- Manufactured in Europe from corrosion resistant Stainless Steel to EN 10088 / EN 10027-2 / 1.4404 (Marine Grade 316L).
QUALITY FEATURES
- Full traceability for all components used in manufacturing process
- All components embossed with our manufacturers mark and Batch Number
- All components are Proof Load Tested to 2.5 x W.L.L.
- Factor of Safety: 4:1
- Finish: Polished
Part Code |
Chain Size (mm) |
Dimensions (mm) |
W.L.L. (t) |
Weight Each (Kg) |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
a |
b |
c |
d |
e |
f |
g |
h |
i |
j |
||||
I5-044/S-06 |
6 |
86 |
23 |
27 |
15 |
19 |
43 |
73 |
115 |
10 |
7 |
700 Kg |
0.28 |
I5-044/S-08 |
7/8 |
102 |
26 |
27 |
19 |
23 |
51 |
87 |
137 |
13 |
8 |
1.20 |
0.56 |
I5-044/S-10 |
10 |
121 |
35 |
28 |
23 |
29 |
66 |
106 |
165 |
15 |
11 |
1.60 |
1.02 |
I5-044/S-13 |
13 |
155 |
41 |
33 |
31 |
36 |
76 |
136 |
208 |
19 |
14 |
2.70 |
1.77 |
I5-044/S-16 |
16 |
230 |
55 |
66 |
40 |
57 |
99 |
190 |
300 | 22 | 16 |
5.00 |
4.80 |
Production Features
- Manufactured in Europe from corrosion resistant Stainless Steel to EN 10088 / EN 10027-2 / 1.4404 (Marine Grade 316L).
Quality Features
- Full material traceability
- Chain links are embossed with manufacturers mark and batch number every 12 links or 1m which ever is the lesser
- Proof Load Tested to 2.5 x W.L.L.
- Factor of Safety: 4:1
- Finish: Polished
Part Code |
Chain Size (mm) |
Dimensions (mm) |
W.L.L. (t) |
Proof Load (t) |
Weight Per M (Kg) |
||
---|---|---|---|---|---|---|---|
A |
B |
C |
|||||
IS5.050.5 |
5 |
5 |
15 |
6.5 |
500 Kg |
1.25 |
0.54 |
IS5.060.5 |
6 |
6 |
18 |
7.8 |
750 Kg |
1.88 |
0.80 |
IS5.070.5 |
7 |
7 |
21 |
9.1 |
1.00 |
2.50 |
1.10 |
IS5.080.5 |
8 |
8 |
24 |
10.4 |
1.25 |
3.12 |
1.40 |
IS5.100.5 |
10 |
10 |
30 |
13 |
2.00 |
5.00 |
2.20 |
IS5.130.5 |
13 |
13 |
39 |
16.9 |
3.20 |
8.00 |
3.80 |
IS5.160.5 |
16 |
16 |
45 |
20.8 |
5.00 |
12.50 |
5.70 |
IS5.180.5 |
18 |
18 |
54 |
24 |
6.30 |
15.75 |
7.30 |
PRODUCTION FEATURES
Manufactured from corrosion resistant Stainless Steel to EN 10088 / EN 10027-2 / 1.4404(Marine Grade 316L) Assembled, Welded and Tested at our Cradley manufacturing siteQUALITY FEATURES
- Full traceability for all components used in manufacturing process
- Sub Assembly embossed with our manufacturing Batch Number.
- Proof Load Tested to 2.5 x W.L.L.
- Factor of Safety: 4:1
- Finish: Polished
Part Code |
Chain Size (mm) |
Dimensions (mm) |
W.L.L. (tonne) |
Weight Each (Kg) |
|||||
---|---|---|---|---|---|---|---|---|---|
A |
B |
C |
D |
E |
F |
||||
131.04.18.135 |
6 |
18 |
135 |
75 |
13 |
54 |
25 |
1.60 |
1.20 |
131.04.22.160 |
7/8 |
22 |
160 |
90 |
16 |
70 |
34 |
2.60 |
2.30 |
131.04.26.180 |
10 |
26 |
180 |
100 |
18 |
85 |
40 |
4.20 |
3.56 |
131.04.32.200 |
13 |
32 |
200 |
110 |
22 |
115 |
50 |
6.70 |
6.05 |
131.04.36.260 |
16 |
36 |
260 |
140 |
26 |
140 |
65 |
10.00 |
10.00 |
PRODUCTION FEATURES
- Manufactured from corrosion resistant Stainless Steel to EN 10088 / EN 10027-2 / 1.4404 (Marine Grade 316L)
- Assembled, Welded and Tested at our Cradley manufacturing site
QUALITY FEATURES
- Full traceability for all components used in manufacturing process
- Master Link embossed with our manufacturing Batch Number.
- Proof Load Tested to 2.5 x W.L.L.
- Factor of Safety: 4:1
- Finish: Polished
Part Code |
Chain Size (mm) |
Dimensions (mm) |
W.L.L. (tonne) |
Weight Each (Kg) |
|||
---|---|---|---|---|---|---|---|
Single Leg |
Double Leg |
A |
B |
C |
|||
131.03.10.80 |
5 |
- |
10 |
80 |
50 |
500 Kg |
0.15 |
131.03.13.110 |
6/7 |
5/6 |
13 |
110 |
60 |
1.00 |
0.34 |
131.03.16.110 |
8 |
6/7 |
16 |
110 |
60 |
1.25 |
0.53 |
131.03.18.135 |
10 |
8 |
18 |
135 |
75 |
2.00 |
0.80 |
131.03.22.160 |
13 |
10 |
22 |
160 |
90 |
3.20 |
1.50 |
131.03.26.180 |
16 |
13 |
26 |
180 |
100 |
5.00 |
2.30 |
131.03.32.200 |
18 |
16 |
32 |
200 |
110 |
7.10 |
3.90 |